Portion of industrial property in Nocera Umbra (PG) - LOT 5

OFFERS COLLECTION - Portion of industrial property in Nocera Umbra (PG), Gaifana Location, SP271 - LOT 5

The property is listed in the Building Registry of the Municipality of Nocera Umbra at Sheet 18:
Parcel 324 - Sub. 11 - Category D/01 - R.C. € 454,136.00
Parcel 324 - Sub. 7 - Category A/3 - Class 3 - Consistency 6 rooms - R.C. € 325.37

The lands are listed in the Land Registry of the Municipality of Nocera Umbra at:
Sheet 18 - Parcels 1027 - 569 - 350 - 352 - 1376

The portion of the property in question is part of the larger industrial complex described below: 

Industrial property located in the immediate vicinity of the fast-flowing road in the Flaminia Variant (ex. SSn°3), 2 km away from the Colle-Gaifana junction.
The building was constructed in various stages starting from 1982 until the latest expansion in 2002.
The construction system consists of cast-in-place concrete for the elevation part, while the roof was made with shed-type concrete roof tiles.
The infill walls are made of block masonry in cast-in-place concrete, with metal and polycarbonate fixtures above, some of which are sliding; there is an industrial type flooring in all areas except for the Offices which were made of marble.

The complex is equipped with all the necessary technological and supply infrastructures, both for the production cycle and for human presence.
There are REI compartments and other protection and prevention devices to provide the necessary safety for employees; the same applies to wastewater drains, emissions, etc.
In detail, the structure was set up with discontinuous foundations, a plinth cast in place connected to the ground by drilled piles (diameter 80cm) cast in place, interconnected with cast-in-place concrete connecting beams. The regular mesh piers are articulated uniformly, with dimensions of 60 cm by 110 cm and a height of 8 meters, on which double T beams are placed to support the prefabricated roof; these horizontal elements
are 200 cm high, limiting the internal height to 7.50 meters from the beam soffit to the finished floor.
While the part obtained in orthogonal span, from the soffit to the intrados of the same, constitutes the Technical Volume for the accommodation of various 25-ton overhead cranes.
The roof is made of precast prestressed concrete elements type HPV resting on -Saddles- in cast-in-place concrete by hinge connection.

Sub 7 represents the caretaker's/porter's house which will be co-owned with the remaining portions of the industrial property.

For further information, please refer to the attached appraisal and documentation.

The collection will be carried out using the following methods:

All potential bidders, except for subjects not allowed by law to participate, after registering on the website www.gobidreal.it, must fill out the participation form (published online) and send it back signed, to accept the proposed conditions, to the following address f54.2020ancona@pecfallimenti.it along with the required documentation.

For more information regarding participation, please consult the Sales Notice and the specific sales conditions.